(Mini) Yamaha R1 2004/5/6 Tail Tidy/ Fender Eliminator-Mini Indicator
This Tail tidy is designed for use with aftermarket indicators and is fitted with a micro LED licence plate light. PLEASE NOTE: Mini indicators not included, but are available seperately in the lighting section.
Kit Contents:
1x Instruction Sheet
2x Stickers
1x Stick on Reflector
6x Cable Ties
2x Male Bullet Connectors
4x 6mm Flange Nuts
4x M4 x 8mm Countersunk Screws
1x Spare LED Bulb
Fitting Instructions:
(Do not shorten the LED wires)
1. Remove the rear seat/cowl.
2. Remove the OE fender by undoing the four socket head screws (be careful not to lose the alum spacers between the fender and the seat unit) and unplug the electrics.
3. Remove the indicators from the OE fender and attach them to the Tail Tidy.
4. Assemble the Tail Tidy using the four s/s CSK screws and route the wires using the zip ties.
5. Attach the Tail Tidy to the bike and connect the wires. Connect the new number plate wires; Black-Black and Red-Red/Blue.
6. Refit the seat/cowl.
7. Check all of the electrics work correctly.
Click Here to download in Adobe PDF format.
