Suzuki GSXR600-750K6/7 2006/7 Tail Tidy/ Fender Eliminator
This Tail Tidy is fitted with a micro LED licence plate light, the machine retains it's integrated indicators
Kit Contents:
1x Spare LED bulb
1x Instruction sheet
2x Male Bullet Terminals
5x Tie Wraps
2x Female Bullet Terminals
4x M6x16B/H black screws
1x Self Adhesive Reflector small
4x 6mm black washers
2x M4x8mm Countersunk Screws
2x Stickers
Fitting Instructions:
(Do not shorten the LED wires)
(Do not mount the number plate too high as it will foul the bend of the LED mounting)
1. Remove rear seat/cowl.
2. Remove front seat.
3. Remove the two screws at the very rear of the bike - located by the sides of the pillion seat hook.
4. Remove the plastic pop fasteners (10 in total) which hold the rear seat cowl together. To remove these press the centre and remove the entire fastener.
5. Unclip the cable for the pillion seat catch.
6. Unplug the connector for the indicators.
7. Remove the tail section.
8. Unplug the number plate connector.
9. Undo and remove the fender
10. Crimp the terminals to the number plate wires
11. Attach the tail tidy and re-assemble the bike reversing the
dismantling procedure described above.
12. Check the electrics work correctly.
Click Here to download in Adobe PDF format.
